Home |  Log In
 
BlueSkyRC.com [home link]

Tricopter

$39.99

The Tricopter frame is laser cut from hand selected 1/8th plywood -- strong and light.


General Information
The Tricopter frame is laser cut from hand selected 1/8th plywood. Strong and light.

The frame is designed for 10mm square booms (Slow Stick size). The Tricopter is a perfect platform for Sport Aerobatics to a solid camera platform including First Person Video Flying (FPV). The frame supports battery straps and laser drilled holes for the 450 Helicopter Landing gear (optional).

The Tricopter kit includes only the Plywood Parts for the frame, motor mounts, and the hinge mechanism for the tail (see parts photo below).

Visit the RCGroups Thread here.

Recommended:
  • 2x8mm Screws for securing arms and mounting motors.
  • 2212-11 - 1200kv Outrunner Motor -- for FPV
  • 2208-17 - 1100kv Outrunner Motor -- for sport flying
  • HW 25A ESC
  • Gemfan Props
  • MultiWii Flight Control Board
  • Landing Gear Skids
  • 10mm Square Wood Arms from MagnumWood Perfect Fit, Strong and Easy to replace.


  • * Arms are not included. Check recommended list above.

    ** Parts are intended to fit tight and may require some sanding and a small hammer or mallet to snug them together. Use CA (super glue) after assembly to secure parts together. See recommended parts listed above.















    Also check out the Y6 Motor Mount upgrade to convert your Tricopter to a 6 motor Y6 copter

    Add to Cart:

    • Model: TRICOPTER
    • Shipping Weight: 0.5lbs


    Current Reviews: 3

    This product was added to our catalog on Friday 10 June, 2011.

     | Home |